Rolls MP13 инструкция

MP13 Mini mic Preamp

Rolls Corporation
Salt Lake City, UT
2/02

- Home

- Studio

- Broadcast

... anywhere you need a clean preamplifier for

your favorite dynamic or condenser microphone

SCHEMATIC

MP13 Mic Pr

eamp

MP13 Mic Pr

eamp

MP13 Mic Pr

eamp

MP13 MINI-MIC PREAMP

MICROPHONE PREAMP

- XLR and 1/8” Inputs

- XLR and 1/4” Outputs

- Gain Control

- Clip LED indicator

- +21 Volt Phantom Power

The MP13 is designed to provide simple, inexpensive microphone

preamplification for a variety of applications. The unit has both XLR

and 1/4” inputs and outputs, a single Gain control with a Clip LED

indicator, and Phantom powering is included for use with a con-

denser microphone. The 1/4” output is specially designed for use

as either a mono unbalanced output, or a stereo headphone output.

SPECIFICATIONS

Connectors:

Inputs;

XLR, 1/8” (3.5mm) TRS balanced Mic In

Outputs: XLR balanced, 1/4” unbal. Aux/Hdphn

Input Impedance:

10K Ohms bal, unbal.

Max Input Level:

+4 dBV XLR bal, +10 dBV unbal.

Max Gain:

60 dB/XLR, 54 dB 1/4”

Phase Shift:

<10 deg. 20 Hz - 20 kHz

EIN:

-108 dB max.

THD:

<.01%

IMD (SMPTE)

<.01%

CMRR:

> 80dB

Phantom Power:

+21 Volts, 6 mA

Power:

12 VDC adapter

Weight:

1 lbs (.45Kg)

Size:

3.4” x 4.2” x1.4”

INTRODUCTION

Thank you for purchasing the ROLLS MP13 MINI-MIC Microphone

Preamp. The MP13 uses a servo balanced instrumentation amplifi-

er for studio grade performance in a small package. This equates to

a 40db better common mode rejection ratio (CMRR) than transistor

inputs used by most companies on mic inputs. It also means much

lower distortion. The clearer sound with more

“

air

”

puts the MP13 in

a class with much higher priced units.

WARRANTY

For compete information on the Rolls 1 Year Warranty, and to regis-

ter this product, see our website at

www.rolls.com

.

FEATURES

- XLR and 1/8” Mic Inputs

- XLR and 1/4” Outputs

- Gain Control

- Clip LED indicator

- 1/4” Output Drives Stereo Headphones
- +21 Volt Phantom Power - available for 1/8” microphones

DESCRIPTION

INPUT: 1/8” (3.5mm) and female XLR jack for signal input.

OUTPUT: 1/4” and male XLR jack for signal output. May be

connected to stereo headphones for personal monitoring.

POWER: Sleeve positive barrel jack for connection to the AC

power adapter.

GAIN: Controls the amount of signal increase to the MP13.

CLIP: LED for indicating circuit clipping. Indicates distortion

is possible.

PHANTOM POWER: When pressed in, applies +36 volts of

phantom powering to the XLR input.

PWR: LED for indicating power is applied to the MP13.